Course overview
- Study period
- Semester 2, 2024 (22/07/2024 - )
- Study level
- Postgraduate Coursework
- Location
- St Lucia
- Attendance mode
- In Person
- Units
- 4
- Administrative campus
- St Lucia
- Coordinating unit
- Architecture, Design and Planning School
This course is one of suite of elective Architectural Research courses that provide an opportunity to develop research skills and specialist knowledge through a guided independent research project.
ARCH7061 provides students with the opportunity to undertake a focused research task in a specific area of research interest, conducted through a series of advisory meetings and self-directed study. The course expects students to achieve an advanced level of academic argument and the mastery of instruments for conducting and expressing that argument. The research project will result in a body of work that communicates the process, outcomes and value of the research. The mode of communication and scope shall be agreed between the student and the supervisor. This may include a written dissertation, fieldwork reports, artefacts from material experiments, designs, and research reports. Students commencing in Semester 1 enrol in ARCH7060 for Sem 1 and Sem 2; Students commencing in semester 2 enrol in ARCH7061 for Sem 2 and the following Sem 1.
ARCH7061ᅠis a guided independent research project conducted through a series of advisory meetings and self-directed study. It provides students with the opportunity to undertake a focused research task in a specific area of research interest. The course expects students to achieve an advanced level of academic argument and the mastery of instruments for constructing and expressing that argument.
The research project culminates in a written dissertation or equivalent outputᅠthat communicates the process, outcomes and value of the research,ᅠas agreed with the thesis advisor.
Students may propose topics that fall within the research interests and expertise of available staff. Prospective students should be aware that availability of topics depends on staff availability.
Course requirements
Prerequisites
You'll need to complete the following courses before enrolling in this one:
Completion of 16 units of MArch and a cumulative GPA of 5.5 or higher
Restrictions
MArch students only
Course contact
Timetable
The timetable for this course is available on the UQ Public Timetable.
Additional timetable information
Students will have an individual advisor and meet one hour per week, or a blocked equivalent.
A small number of group meetings and seminars will be organsised to bring students in the Thesis cohort together. Students will be notified about the schedule of these at the start of the semester.
Aims and outcomes
This course aims to develop students' capacity to plan and implement an independent research project on a topic relevant to the discipline of architecture.
Learning outcomes
After successfully completing this course you should be able to:
LO1.
Critically analyse a body of literature or creative works.
LO2.
Distinguish a research problem in the literature or creative works.
LO3.
Design an investigatory strategy to address an identified research problem.
LO4.
Apply an investigatory strategy to an identified research problem.
LO5.
Construct a scholarly thesis based on argument, evidence and insight.
Assessment
Assessment summary
Category | Assessment task | Weight | Due date |
---|---|---|---|
Paper/ Report/ Annotation | Assignment 1: Thesis Re-Proposal Structure & Essay | 20% |
28/08/2024 2:00 pm
Submission and Presentation |
Thesis |
Final Thesis
|
70% |
12/05/2025 2:00 pm
Submission and Presentation |
Thesis | Thesis Corrections and Upload | 10% |
9/06/2025 2:00 pm |
A hurdle is an assessment requirement that must be satisfied in order to receive a specific grade for the course. Check the assessment details for more information about hurdle requirements.
Assessment details
Assignment 1: Thesis Re-Proposal Structure & Essay
- Mode
- Oral, Written
- Category
- Paper/ Report/ Annotation
- Weight
- 20%
- Due date
28/08/2024 2:00 pm
Submission and Presentation
Task description
Assessment Rationale:
The purpose of this assignment is to demonstrate the research processes undertaken to date, and to confirm the plan and format for the completed thesis document. Submit a research report consisting of a) a detailed Research Proposal, b) a short Essay suitable to be incorporated in the thesis, and c) an annotated bibliography.
Format the Research Proposal under the following headings: Title / Abstract (100-300 words) / Discussion (a prose statement of up to 600-1200 words describing the subject of the research, the method or mode of inquiry, the likely significance of the study / Chapter Plan (one-two pages only, 3-5 bullet points per chapter) / Research Plan (showing work week by week to submission / Bibliography of works relevant to the study (mark with a star those works consulted thus far.)
Essay: a sample of writing showing your ability to report and/or analyse the first stages of the research. This could be a draft of a chapter, a set of precis of readings at length, an exegesis of a construction, experiment or field trip, as agreed with the advisor (suggested length 1200-1500 words).
Provision is made for progressive assessment; formative by the supervisor in weekly meetings, and summative in marks and feedback for this assignment.
The work is due digitally by 2pm on the day of submission, and presented at a seminar later that day, scheduled between 2pm-5pm (Room TBC). Seminar presentations should no more than three slides and run no longer than 10 mins in order to allow time for feedback.
Complex/Authentic assessment using AI or MT to support learning: Artificial Intelligence (AI) and Machine Translation (MT) are emerging tools that may support students in completing this assessment task. Students may appropriately use AI and/or MT in completing this assessment task. Students must clearly reference any use of AI or MT in each instance.
A failure to reference generative AI or MT use may constitute student misconduct under the Student Code of Conduct.
Submission guidelines
The School of Architecture, Design and Planning uses Blackboard and Turnitin for assessment submission. Turnitin is accessed through the course Blackboard site. Turnitin also checks for plagiarism or instances where the original work of others is not appropriately acknowledged.
Students are advised to commence assignment uploads with sufficient amount of time (consider possible technical problems with computers, internet speed, etc). After successfully submitting an assignment through Turnitin, a ‘Submission Complete!’ screen will be displayed. It is the student’s responsibility to check assignment preview and confirm successful submission. If the ‘Submission Complete!’ screen isn’t displayed, the student should regard the submission as unsuccessful. Students should download a copy of the digital receipt as proof they have submitted the assignment. Students who are experiencing upload issues must advise the Course Coordinator immediately by email and should include screenshots and a copy of the assessment for submission.
Deferral or extension
You may be able to apply for an extension.
The maximum extension allowed is 28 days. Extensions are given in multiples of 24 hours.
If a student wishes to apply for an extension, they must apply online on or before the assignment due date. When possible, it is suggested that requests are submitted 2 business days prior to the submission due date for the assignment to allow processing time. Students with outstanding applications for extensions are advised to submit their assessment by the original due date, irrespective of whether the work is complete, so that what has been done can be graded.
Late submission
10% per 24 hours of the maximum possible mark for the assessment item, or one grade per 24 hours if graded on a scale of 1-7, or equivalent penalty if an alternative grading approach is used. For example, a report worth a maximum of 40 marks, submitted 28 hours late will attract a penalty of 8 marks, calculated as 2 periods of 24 hours x 10% x 40 marks. Where there are more than 7 periods of 24 hours, the penalty is 100%.
Final Thesis
- Hurdle
- Mode
- Written
- Category
- Thesis
- Weight
- 70%
- Due date
12/05/2025 2:00 pm
Submission and Presentation
Task description
Assessment Rationale:
The Thesis is a document of 10,000-15,000 words including footnotes. The word count could be less if the research outcomes are largely graphical or numerical, as agreed with the advisor. Apart from text, the Thesis may contain drawings, data, models, images, video and other media as agreed with the Advisor.
The Thesis may develop research previously conducted for other 2 Unit Part D Research Courses. However, the expectation is that prior work has been reconsidered and reframed in the Thesis; it should not be reproduced verbatim. The Thesis should represent a substantial new body of work. No more than 20% of the text can be repeated from earlier submissions. The Thesis should contain a statement headed “Prior research included in this Thesis” identifying any sections that draw on research conducted prior to enrolling in ARCH7061 and any prose sections that have been previously submitted for a previous course.
The Thesis should be presented as a PDF document suitable to be printed at A4 either portrait or landscape format, or A3 landscape format. If the Thesis includes video or 3D models embedded in the PDF, make sure to also include 2D still images of this material in case of future media incompatibility.
Formative Feedback: You should be meeting and discussing drafts regularly with your advisor(s) during teaching weeks. Formal formative feedback points are scheduled in Week 9 of Semester 2 2024, when a draft chapter should be submitted directly to your advisor for feedback. Presentations are scheduled during Week 6 in Semester 1 2025 (Time and date to be confirmed following the release of the Semester 1 2025 timetable). Students will present a 10-15 minute paper based on one aspect of their research and include a brief overview of how this fits into the thesis. Formative feedback will be given verbally following presentations. Please refer to the Course Schedule for the Zoom Link.
Following the examination of the Thesis, students will be required to make any recommended corrections or amendments to the satisfaction of the Advisor and Course Coordinator, and upload the corrected Thesis to eSpace.
Complex/Authentic assessment using AI and/or MT to support learning: Artificial Intelligence (AI) and Machine Translation (MT) are emerging tools that may support students in completing this assessment task. Students may appropriately use AI and/or MT in completing this assessment task. Students must clearly reference any use of AI or MT in each instance.
A failure to reference generative AI or MT use may constitute student misconduct under the Student Code of Conduct.
Hurdle requirements
A hurdle is an assessment requirement that must be satisfied to receive a specific grade in the course. 'Final Thesis' assessment item is designated as a Hurdle in this course. This means a minimum achievement of 50% (a grade of 4) is required for this assessment item in order to pass the course. Meeting the hurdle requirement for a course does not guarantee a passing grade for the course and in order to pass this course, students also need to achieve a minimum grade of 4 overall.Submission guidelines
The School of Architecture, Design and Planning uses Blackboard and Turnitin for assessment submission. Turnitin is accessed through the course Blackboard site. Turnitin also checks for plagiarism or instances where the original work of others is not appropriately acknowledged.
Students are advised to commence assignment uploads with sufficient amount of time (consider possible technical problems with computers, internet speed, etc). After successfully submitting an assignment through Turnitin, a ‘Submission Complete!’ screen will be displayed. It is the student’s responsibility to check assignment preview and confirm successful submission. If the ‘Submission Complete!’ screen isn’t displayed, the student should regard the submission as unsuccessful. Students should download a copy of the digital receipt as proof they have submitted the assignment. Students who are experiencing upload issues must advise the Course Coordinator immediately by email and should include screenshots and a copy of the assessment for submission.
Deferral or extension
You may be able to apply for an extension.
The maximum extension allowed is 28 days. Extensions are given in multiples of 24 hours.
If a student wishes to apply for an extension, they must apply online on or before the assignment due date. When possible, it is suggested that requests are submitted 2 business days prior to the submission due date for the assignment to allow processing time. Students with outstanding applications for extensions are advised to submit their assessment by the original due date, irrespective of whether the work is complete, so that what has been done can be graded.
Late submission
The late penalty for this assessment item will be calculated as follows:
10% per 24 hours of the maximum possible mark for the assessment item, or one grade per 24 hours if graded on a scale of 1-7, or equivalent penalty if an alternative grading approach is used. For example, a report worth a maximum of 40 marks, submitted 28 hours late will attract a penalty of 8 marks, calculated as 2 periods of 24 hours x 10% x 40 marks. Where there are more than 7 periods of 24 hours, the penalty is 100%.
Thesis Corrections and Upload
- Mode
- Written
- Category
- Thesis
- Weight
- 10%
- Due date
9/06/2025 2:00 pm
- Learning outcomes
- L05
Task description
Assessment Rationale:
Following the assessment of the Thesis, 10% of the awarded grade will be withheld, pending:
a) the satisfactory completion of any corrections and amendments recommended as part of the examination,
b) If the student chooses to publish the thesis through UQ's eSpace research repository, then filling out the permissions form.
Students should include a table that succinctly demonstrates how they have responded to any feedback, recommendations and corrections made by the examiners.
Satisfactory corrections, amendments and upload will be completed to the satisfaction of the supervisor and course co-ordinator.
Complex/Authentic assessment using AI and/or MT to support learning: Artificial Intelligence (AI) and Machine Translation (MT) are emerging tools that may support students in completing this assessment task. Students may appropriately use AI and/or MT in completing this assessment task. Students must clearly reference any use of AI or MT in each instance.
A failure to reference generative AI or MT use may constitute student misconduct under the Student Code of Conduct.
Submission guidelines
The School of Architecture, Design and Planning uses Blackboard and Turnitin for assessment submission. Turnitin is accessed through the course Blackboard site. Turnitin also checks for plagiarism or instances where the original work of others is not appropriately acknowledged.
Students are advised to commence assignment uploads with sufficient amount of time (consider possible technical problems with computers, internet speed, etc). After successfully submitting an assignment through Turnitin, a ‘Submission Complete!’ screen will be displayed. It is the student’s responsibility to check assignment preview and confirm successful submission. If the ‘Submission Complete!’ screen isn’t displayed, the student should regard the submission as unsuccessful. Students should download a copy of the digital receipt as proof they have submitted the assignment. Students who are experiencing upload issues must advise the Course Coordinator immediately by email and should include screenshots and a copy of the assessment for submission.
Digital submission of corrected Thesis to e-space. Table of corrections to be submitted via Blackboard.
Deferral or extension
You may be able to apply for an extension.
The maximum extension allowed is 28 days. Extensions are given in multiples of 24 hours.
If a student wishes to apply for an extension, they must apply online on or before the assignment due date. When possible, it is suggested that requests are submitted 2 business days prior to the submission due date for the assignment to allow processing time. Students with outstanding applications for extensions are advised to submit their assessment by the original due date, irrespective of whether the work is complete, so that what has been done can be graded.
Late submission
The late penalty for this assessment item will be calculated as follows:
10% per 24 hours of the maximum possible mark for the assessment item, or one grade per 24 hours if graded on a scale of 1-7, or equivalent penalty if an alternative grading approach is used. For example, a report worth a maximum of 40 marks, submitted 28 hours late will attract a penalty of 8 marks, calculated as 2 periods of 24 hours x 10% x 40 marks. Where there are more than 7 periods of 24 hours, the penalty is 100%.
Course grading
Full criteria for each grade is available in the Assessment Procedure.
Grade | Cut off Percent | Description |
---|---|---|
1 (Low Fail) | 0 - 24 |
Absence of evidence of achievement of course learning outcomes. |
2 (Fail) | 25 - 44 |
Minimal evidence of achievement of course learning outcomes. |
3 (Marginal Fail) | 45 - 49 |
Demonstrated evidence of developing achievement of course learning outcomes |
4 (Pass) | 50 - 64 |
Demonstrated evidence of functional achievement of course learning outcomes. |
5 (Credit) | 65 - 74 |
Demonstrated evidence of proficient achievement of course learning outcomes. |
6 (Distinction) | 75 - 84 |
Demonstrated evidence of advanced achievement of course learning outcomes. |
7 (High Distinction) | 85 - 100 |
Demonstrated evidence of exceptional achievement of course learning outcomes. |
Additional course grading information
Identity verified assessment (IVA) - Thesis Courses
Thesis Courses require students to plan, conduct and report on research in an iterative and cumulative way throughout the duration of the course.
To meet assessment validity and integrity obligations in Thesis Courses students must regularly present and discuss their work with teaching staff over the course of scheduled learning activities including lectures, tutorials, seminars, workshops, individual and group consultations, and presentations. Students are expected to participate in at least 80% of scheduled learning activities in which the progress of their work is intended to be monitored and reviewed. If participation in such activities falls below 80%, students may be asked to submit process work (including drawings, analysis of research data, drafts of written assessments). If a student is not able to provide evidence of authorship to the satisfaction of the course coordinator, or if their participation falls below 50%, a maximum grade of 3 will be awarded.
Supplementary assessment
Supplementary assessment is not available for some items in this course.
Supplementary assessment may be considered in this thesis course in some circumstances, for example if the research is complete and the findings reportable, but the final presentation of the work/dissertation is incomplete. Supplementary assessment will not be considered on the basis of incomplete or unfinished research, or in circumstances where there is no practical supplementary assessment option available.
Learning resources
You'll need the following resources to successfully complete the course. We've indicated below if you need a personal copy of the reading materials or your own item.
Library resources
Library resources are available on the UQ Library website.
Additional learning resources information
There are no pre-set required resources for this course. Resources are entirely dependent on students'ᅠindividual research topics and projects. Student and Advisor will work together to identify appropriate resources for their particular research.
Learning activities
The learning activities for this course are outlined below. Learn more about the learning outcomes that apply to this course.
Filter activity type by
Please select
Learning period | Activity type | Topic |
---|---|---|
Multiple weeks |
Tutorial |
Final Thesis Supervision (Tutorial) Regular weekly or fortnightly meetings with Advisor to the equivalent of one hour per week. Regular attendance and showing work in progress is a requirement. |
Workshop |
Introductory Meeting: research methods Week 1 - briefing on process, brief discussion of projects. |
Policies and procedures
University policies and procedures apply to all aspects of student life. As a UQ student, you must comply with University-wide and program-specific requirements, including the:
- Student Code of Conduct Policy
- Student Integrity and Misconduct Policy and Procedure
- Assessment Procedure
- Examinations Procedure
- Reasonable Adjustments - Students Policy and Procedure
Learn more about UQ policies on my.UQ and the Policy and Procedure Library.