Skip to content Skip to footer
Course profile

Electromagnetism & Modern Physics (PHYS1002)

Study period
Sem 2 2026
Location
St Lucia
Attendance mode
In Person

Course overview

Study period
Semester 2, 2026 (27/07/2026 - 21/11/2026)
Study level
Undergraduate
Location
St Lucia
Attendance mode
In Person
Units
2
Administrative campus
St Lucia
Coordinating unit
Mathematics & Physics School

Electricity, magnetism, optics, quantum physics, relativity. Laboratory experiments.

Our fundamental view of the universe has been revolutionised by physics discoveries and theoretical breakthroughs over the last 200 years. PHYS1002 provides a broad overview of the foundations of modern physics, which also underpin much of our contemporary technology. The content includes electromagnetism from which photonic and RF/microwave communications were developed; relativity required for GPS navigation; and quantum physics critical for lasers and semiconductors, and hence computers and many other technologies. PHYS1002 is a core physics course for entry to second level physics.

PHYS1002 is taught with a philosophy of active learning. Studies at Harvard, MIT and other universities (including UQ) have shown active learning approaches to be more effective than conventional lectures in generating deep understanding of physics concepts. To get the full benefit from it you will need to put in work to prepare for each class. ᅠ

The most effective preparation for class is to read the relevant sections of the textbook. You don't need to understand everything in the reading - the purpose is to gain some familiarity with the content so that we can use class time – in the form of interactive workshops – to help you process the content and develop understanding.

To help you in this preparation, we have created a comprehensive set of online resources. ᅠThese resources include:

  • Introductory videos that highlight the important concepts you will encounter in the assigned textbook reading.
  • Short podcasts providing a student viewpoint of the reading.
  • Problem-solving videos in which staff members talk through the stepsᅠinvolved in solving relevant problems.
  • For some topics, there are also interactive simulations.
  • Sets of check-your-knowledge multiple choice questions for feedback.


More information about how we run the course, and how you can best make use of the materials and learning activities on offer, will be provided on the course Blackboard site and briefly summarised at the first workshop.

The expected time commitment for PHYS1002 is around 10 hours per week. Of these, approximately 2.5 hours are expected to be spent on workshop preparation via viewing the prepatory online material and reading the textbook. Another four hours is spent in workshop, about 2 hours per week on average spent preparing and completing the practicals, and 1.5 hours doing homework questions (which can be done in your applied class). More information about how we run the course, and how you can best make use of the range of materials and learning activities on offer, will be given at the first workshop.

Prior to the start of classes you should:

  • Ensure you have access to the primary textbook for the course: Physics for Scientists and Engineers, A Strategic Approach with Modern Physics, 5th Ed., by Randall D. Knight. You will be provided with free online access through the PHYS1002 Blackboard site, however you may also wish to obtain a hard copy. (Earlier editions are are also suitable.)
  • Go to the UQ Extend home page, via the link on Blackboard. UQ Extendᅠis the platform that will host the online materials. If you have not used UQ Extendᅠfor a prior course, you will be asked to create an account.
  • Prepare for the the first week of classes, and complete the workshop reading questions. The readings required for each class are listed on the course Blackboard site.


In the School of Mathematics and Physics we are committed to creating an inclusive and empowering learning environment for all students. We value and respect the diverse range of experiences our students bring to their education, and we believe that this diversity is crucial for fostering a rich culture of knowledge sharing and meaningful exploration. We hold both students and staff accountable for actively contributing to the establishment of a respectful and supportive learning environment.

Bullying, harassment, and discrimination in any form are strictly against our principles and against UQ Policy, and will not be tolerated. We have developed a suite of resources to assist you in recognising, reporting, and addressing such behaviour. If you have any concerns about your experience in this course, we encourage you to tell a member of the course teaching team, or alternatively contact an SMP Classroom Inclusivity Champion (see Blackboard for contact details). Our Inclusivity Champions are here to listen, to understand your concerns, and to explore potential actions that can be taken to resolve them. Your well-being and a positive learning atmosphere are of utmost importance to us.

Course requirements

Assumed background

Secondary school years 11 and 12 physics and mathematics with calculus; preferably including Specialist Mathematics.

Prerequisites

You'll need to complete the following courses before enrolling in this one:

MATH1050 or a grade of C or higher in Queensland Year 12 Specialist Mathematics (Units 3 & 4) (or equivalent); and PHYS1171 or a grade of C or higher in Queensland Year 12 Physics (Units 3 & 4) (or equivalent).

Recommended prerequisites

We recommend completing the following courses before enrolling in this one:

PHYS1001

Recommended companion or co-requisite courses

We recommend completing the following courses at the same time:

(MATH1051 or MATH1071) and (MATH1052 or MATH1072)

Course contact

Course staff

Lecturer

Timetable

The timetable for this course is available on the UQ Public Timetable.

Additional timetable information

Applied classes will begin in week 2, and run every week until week 13

Practicals will begin in week 3 or 4, depending on your enrolment. There are five practical classes throughout the semester, held every second week.

All classes will be conducted on campus – consult your personal timetable for times and locations. Students are expected to attend these sessions in person unless they have a validᅠreason for being unable to attend (such as illness). Important: if you are ill, then do not attend any classes in person. Alternative arrangements can be organised – consult Blackboard for details.

There will be no learning activities on public holidays. If your applied class is scheduled on a public holiday, then please attend an applied class on another day for that week.

Aims and outcomes

On completing this course students will:

  • understand central concepts in electricity, electromagnetism, and modern physics.
  • be able to solve a range of numerical problems involving these concepts.
  • be capable of linking the underlying theory to everyday phenomena and scientific or engineering applications
  • be able to use their problem-solving skills in other scientific and engineering areas.
  • develop skills in experimental work, report writing, and using uncertainty analysis in processing experimental data.

Learning outcomes

After successfully completing this course you should be able to:

LO1.

Physics Theory and Concepts - explain key physics concepts, and using mathematical techniques, apply physics theory and unifying laws relating to electricity, electromagnetism, quantum mechanics, and relativity.

LO2.

Physics Theory and Concepts - demonstrate an understanding of scientific methods, and the critical role of integrity and ethics in scientific progress, including the ability to: (a) Propose scientific questions/hypotheses and develop theoretical models that make testable predictions relating to these questions/hypotheses; (b) Develop, perform, and extract meaningful measurements from experiments to test predictions of scientific models; (c) Evaluate the validity of theoretical predictions and experimental measurements, through application of critical reasoning.

LO3.

Physics Theory and Concepts - articulate scientific processes both verbally and in writing in a style appropriate to the discipline; including explanations of: (a) Scientific questions/hypotheses; (b) Development and evaluation of theoretical models; (c) Critical reasoning, experimental procedures and conclusions; (d) Communication of experimental measurement outcomes.

Assessment

Assessment summary

Category Assessment task Weight Due date
Quiz Active Learning Engagement - reading quizzes and workshop concept quizzes - formative assessment
  • In-person
  • Online
5%

27/07/2026 - 30/10/2026

Each reading quiz is due 5pm the day before the corresponding workshop. Each workshop concept quiz is completed during the workshop. There are no late submissions or extensions.

Tutorial/ Problem Set MasteringPhysics Problems
  • Online
15%

10/08/2026 2:00 pm

17/08/2026 2:00 pm

24/08/2026 2:00 pm

31/08/2026 2:00 pm

7/09/2026 2:00 pm

14/09/2026 2:00 pm

21/09/2026 2:00 pm

6/10/2026 2:00 pm

12/10/2026 2:00 pm

19/10/2026 2:00 pm

26/10/2026 2:00 pm

Notebook/ Logbook, Quiz, Reflection, Tutorial/ Problem Set Practical worksheets and assessment
  • Hurdle
10%

Practical worksheets and assessment 1

Practical worksheets and assessment 2

Practical worksheets and assessment 3

Practical worksheets and assessment 4

Practical worksheets and assessment 5

The pre-practical work must be completed before the practical session, and checked off at the start.

All remaining practical checkpoints must be checked off before the end of your practical session.

Your practical worksheet must be submitted within 24 hours of completing the practical.

The post-practical assessment must be submitted within one week of the end of the practical session you attended.

Paper/ Report/ Annotation Laboratory report 20%

23/10/2026 2:00 pm

Examination End of Semester examination
  • Hurdle
  • Identity Verified
  • In-person
50%

End of Semester Exam Period

7/11/2026 - 21/11/2026

A hurdle is an assessment requirement that must be satisfied in order to receive a specific grade for the course. Check the assessment details for more information about hurdle requirements.

Assessment details

Active Learning Engagement - reading quizzes and workshop concept quizzes - formative assessment

  • In-person
  • Online
Mode
Activity/ Performance, Written
Category
Quiz
Weight
5%
Due date

27/07/2026 - 30/10/2026

Each reading quiz is due 5pm the day before the corresponding workshop. Each workshop concept quiz is completed during the workshop. There are no late submissions or extensions.

Other conditions
Longitudinal.

See the conditions definitions

Task description

This assessment item is designed to encourage preparation for workshops and active participation during class. It consists of two components: reading quizzes and workshop concept quizzes.

Reading quizzes: Before each workshop, you will be assigned textbook reading to help prepare you for the learning activities. After completing the reading, you should attempt the associated reading quiz. Each reading quiz contains:

  • A content-related question that must be answered to receive credit for the quiz.
  • An optional reflection question asking what you found difficult, confusing, or interesting in the reading.

Your responses will be used by teaching staff to identify topics that require additional explanation during workshops. The quizzes are assessed on participation and effort rather than correctness.

Workshop concept quizzes: During workshops, you will answer multiple-choice concept questions using the EchoPoll system. To receive credit for a workshop concept quiz, you must submit responses to at least 75% of the concept questions asked during that workshop. These quizzes are intended to support learning and provide immediate feedback on your understanding of the material.

Grade calculation: There will be 22 reading quizzes and 22 workshop concept quizzes during the semester, giving a total of 44 opportunities to earn participation credit.

For each reading quiz and workshop concept quiz completed successfully, you will earn one participation credit.

Your grade for this assessment item will be calculated as:

Grade = 7 × minimum(Total participation credits/16,1)

where:

Total participation credits = Reading quiz credits + Workshop concept quiz credits

You therefore need to earn 16 participation credits to receive a grade of 7 for this assessment item.

Because there are substantially more opportunities to earn full marks (44 opportunities for 16 required credits), extensions and deferred assessment are not available for reading quizzes or workshop concept quizzes.

Students are nevertheless strongly encouraged to complete as many quizzes as possible throughout the semester, as these activities are designed to support learning and improve success in the course.

Assessment security

Open assessment: In this assessment you can use resources such as your notes, course materials, and other tools, including AI, while completing the task. The focus is not on memorising information, but on understanding, applying judgement, and demonstrating your own thinking.

Submission guidelines

Reading quiz: submitted online via Blackboard.

Workshop concept quiz: submitted via EchoPoll during workshops

Deferral or extension

You cannot defer or apply for an extension for this assessment.

Extensions for this activity are not possible as students need to complete the quizzes either before or during the workshop. There are 22 content workshops during semester, giving a maximum of 44 possible marks for this assessment item. As only 16 are required for full marks, there are no extensions available.

Late submission

Late submission of these activities are not possible as students need to complete the quizzes either before or during the workshop. There are 22 content workshops during semester, giving a maximum of 44 possible marks for this assessment item. As only 16 are required for full marks, no late submissions are accepted.

MasteringPhysics Problems

  • Online
Mode
Written
Category
Tutorial/ Problem Set
Weight
15%
Due date

10/08/2026 2:00 pm

17/08/2026 2:00 pm

24/08/2026 2:00 pm

31/08/2026 2:00 pm

7/09/2026 2:00 pm

14/09/2026 2:00 pm

21/09/2026 2:00 pm

6/10/2026 2:00 pm

12/10/2026 2:00 pm

19/10/2026 2:00 pm

26/10/2026 2:00 pm

Other conditions
Longitudinal.

See the conditions definitions

Task description

MasteringPhysics is the online homework platform that accompanies the prescribed textbook for this course. The assigned problems are designed to help you learn the course material and develop the skills and understanding required to achieve the learning objectives of the course.

Questions will be assigned for each week of course content and are due on the Monday following your Applied Class for that topic. We strongly recommend completing the assigned problems soon after the material is covered in workshops. This will help consolidate your understanding and keep you on track with the course, as many concepts build on material introduced earlier in the semester.

You are encouraged to attempt the MasteringPhysics problems before attending your Applied Class, where your instructor will provide assistance with problem solving and answer questions. You may also ask general questions on the course discussion board.

As you work through the problems, you are encouraged to clearly write out your reasoning and solution method on paper rather than simply entering answers into the online system. Seeking feedback on your written solutions during Applied Classes will help you develop effective problem-solving habits and prepare you for the End of Semester examination.

Artificial intelligence tools can provide useful support when used appropriately. However, relying on AI-generated solutions without attempting the problems yourself is unlikely to help you develop the understanding and problem-solving skills needed for success in the End of Semester examination. Instead, we encourage you to use AI as a learning aid—for example, by asking for hints, explanations of concepts, or feedback on your reasoning—while still working through the solutions yourself.

We also encourage you to discuss problem-solving approaches with your classmates. Collaborative learning can be a highly effective way to deepen your understanding and develop confidence in applying physics concepts.

Assessment security

Open assessment: In this assessment you can use resources such as your notes, course materials, and other tools, including AI, while completing the task. The focus is not on memorising information, but on understanding, applying judgement, and demonstrating your own thinking.

Submission guidelines

From Blackboard access the link for "MasteringPhysics" from Pearson. There you will find the problems for each topic and you answer them online. You can do these at your own pace throughout the semester.

Deferral or extension

You may be able to apply for an extension.

The maximum extension allowed is 28 days. Extensions are given in multiples of 24 hours.

Late submission

A penalty of 1 grade for each 24 hour period from time submission is due will apply for up to 7 days. After 7 days you will receive a mark of 0.

Practical worksheets and assessment

  • Hurdle
Mode
Written
Category
Notebook/ Logbook, Quiz, Reflection, Tutorial/ Problem Set
Weight
10%
Due date

Practical worksheets and assessment 1

Practical worksheets and assessment 2

Practical worksheets and assessment 3

Practical worksheets and assessment 4

Practical worksheets and assessment 5

The pre-practical work must be completed before the practical session, and checked off at the start.

All remaining practical checkpoints must be checked off before the end of your practical session.

Your practical worksheet must be submitted within 24 hours of completing the practical.

The post-practical assessment must be submitted within one week of the end of the practical session you attended.

Task description

There are five practical sessions in PHYS1002 during the semester. These take place every two weeks between Week 3 and Week 12, depending on your allocated practical group. Each practical is a three-hour session in which you will carry out an experiment, complete a worksheet, and answer questions about the investigation. Each practical includes a series of checkpoints that you must successfully complete.

Before each practical: You must complete a pre-practical quiz on Blackboard to demonstrate that you have prepared for the practical. This quiz forms the first checkpoint for the practical session. You must answer every question correctly to pass the quiz; however, unlimited attempts are available. Students who have not satisfactorily completed the pre-practical quiz will not be permitted to enter the laboratory.

During the practical: At various checkpoints throughout the session, your demonstrator will review your worksheet and confirm that you are making satisfactory progress. To pass each checkpoint, you must maintain an appropriate record of your work in the worksheet, participate diligently and collaboratively in the practical activities, and remain in the laboratory until your demonstrator has confirmed that the checkpoint requirements have been met.

After the practical: You must upload your completed worksheet via Blackboard within 24 hours of your practical session. The worksheet itself will not be formally marked, as feedback on your work will be provided by demonstrators during the practical checkpoints.

Post-practical assessment: The post-practical assessment is a written assessment completed outside of class. It contains a number of questions based on the knowledge, skills, and data obtained during the practical session. Marks for this assessment item are awarded through the post-practical assessments.

The post-practical assessment is intended to be completed after you have completed the pre-practical quiz, attended the practical session, satisfied all practical checkpoints, and uploaded your worksheet. It is not a substitute for attendance at the practical, and students who do not complete the required practical activities and checkpoints will not receive marks for the corresponding post-practical assessment.

You must submit completed post-practical assessment via the link on Blackboard within one week of completing the practical. The assessment will then be marked by your demonstrator.

Assessment security

Open assessment: In this assessment you can use resources such as your notes, course materials, and other tools, including AI, while completing the task. The focus is not on memorising information, but on understanding, applying judgement, and demonstrating your own thinking.

Hurdle requirements

See COURSE GRADING INFORMATION for the hurdle relating to this assessment item.

Submission guidelines

The checkpoints will be marked in your practical session.

Your pre-practical quiz, completed practical worksheet and post-practical assessment will be submitted via the link on Blackboard. You cannot submit the post-practical assessment if you have not attained all the practical checkpoints.

Deferral or extension

You may be able to apply for an extension.

The maximum extension allowed is 28 days. Extensions are given in multiples of 24 hours.

All practical checkpoints must be completed before or during the practical session that you attend.

If you miss a practical session, or do not complete all required checkpoints, you will normally be given an opportunity to complete the practical in another session during the same practical cycle or during a few catch-up sessions that will be arranged during semester. There will be a final catch-up session in Week 13.

Practical 3 is an exception. As the laboratory report assessment is based on this experiment, students must complete Practical 3 as close as possible to the scheduled practical cycle. Students who miss Practical 3 will be offered a catch-up opportunity at the earliest possible time. However, students are responsible for contacting the course staff promptly to arrange this catch-up session.

Week 13 catch-up sessions are intended to assist students who have missed practical sessions and would otherwise be unable to satisfy the practical hurdle requirements for the course.

Standard extensions are available for the submission of post-practical assessments in accordance with University policies. Extensions do not apply to practical attendance requirements or practical checkpoints.

Late submission

A penalty of 1 grade for each 24 hour period from time submission is due will apply for up to 7 days. After 7 days you will receive a mark of 0.

Laboratory report

Mode
Written
Category
Paper/ Report/ Annotation
Weight
20%
Due date

23/10/2026 2:00 pm

Task description

During Practical 3, you will perform an experiment that forms the basis of a laboratory report. Following the return of feedback and marks for the associated post-practical assessment, you will prepare and submit a more formal laboratory report based on this experiment.

To support you in this task, you will be able to book an individual consultation with teaching staff in Weeks 11 and 12 to receive feedback on a draft of your report.

Full details of the report, including assessment criteria, submission requirements, and consultation booking arrangements, will be provided on Blackboard.

Assessment security

Open assessment: In this assessment you can use resources such as your notes, course materials, and other tools, including AI, while completing the task. The focus is not on memorising information, but on understanding, applying judgement, and demonstrating your own thinking.

Submission guidelines

Your laboratory report will be prepared as a pdf document and will be submitted via the link on Blackboard.

Deferral or extension

You may be able to apply for an extension.

The maximum extension allowed is 28 days. Extensions are given in multiples of 24 hours.

Late submission

A penalty of 1 grade for each 24 hour period from time submission is due will apply for up to 7 days. After 7 days you will receive a mark of 0.

End of Semester examination

  • Hurdle
  • Identity Verified
  • In-person
Mode
Written
Category
Examination
Weight
50%
Due date

End of Semester Exam Period

7/11/2026 - 21/11/2026

Other conditions
Time limited, Secure.

See the conditions definitions

Task description

The examination will be invigilated on-campus for all students.

The standard PHYS1002 formula sheet will be supplied for your convenience.

The exam will cover the content from the whole semester (Modules 1, 2, 3). Examples of recent exams are available on the UQ Library web-site. Written solutions for these exams are not available. Selected exam style questions will be worked through in workshops and applied classes.

Assessment security

Secure assessment: This assessment is designed to protect academic integrity and assess your understanding of course concepts. You must only use the approved materials and tools for this assessment task. Use of prohibited materials in this task may be investigated and treated as academic misconduct. See assessment instructions for more details.

Hurdle requirements

See COURSE GRADING INFORMATION for the hurdle relating to this assessment item.

Exam details

Planning time 10 minutes
Duration 120 minutes
Calculator options

(In person) Casio FX82 series only or UQ approved and labelled calculator

Open/closed book Closed book examination - specified written materials permitted
Materials

One A4 sheet of handwritten or typed notes, double sided, is permitted

Exam platform Paper based
Invigilation

Invigilated in person

Submission guidelines

Deferral or extension

You may be able to defer this exam.

See ADDITIONAL ASSESSMENT INFORMATION for deferred examination information relating to this assessment item.

Course grading

Full criteria for each grade is available in the Assessment Procedure.

Grade Description
1 (Low Fail)

Absence of evidence of achievement of course learning outcomes.

Course grade description: Fails to demonstrate most or all of the basic requirements of the course: The student demonstrates very limited understanding of the theory of the topics listed in the course outline and of the basic concepts in the course material. This includes attempts at answering some questions but demonstrating very limited understanding of the key concepts.

2 (Fail)

Minimal evidence of achievement of course learning outcomes.

Course grade description: Demonstrates clear deficiencies in understanding and applying fundamental concepts; communicates information or ideas in ways that are frequently incomplete or confusing and give little attention to the conventions of the discipline: The student demonstrates limited understanding of the theory of the topics listed in the course outline and demonstrates limited knowledge of the techniques used to solve problems. This includes attempts at expressing their deductions and explanations and attempts to answer a few questions accurately. To earn a final grade of 2, a student will have achieved a weighted average grade of at least 1.5, and not met the requirements for a higher grade.

3 (Marginal Fail)

Demonstrated evidence of developing achievement of course learning outcomes

Course grade description: Demonstrates superficial or partial or faulty understanding of the fundamental concepts of the field of study and limited ability to apply these concepts; presents undeveloped or inappropriate or unsupported arguments; communicates information or ideas with lack of clarity and inconsistent adherence to the conventions of the discipline: The student demonstrates some understanding of the theory of the topics listed in the course outline and demonstrates some knowledge of the techniques used to solve problems, but fails to satisfy all of the basic requirements for a pass. To earn a final grade of 3, a student will have achieved a weighted average grade of at least 2.5, and not met the requirements for a higher grade.

4 (Pass)

Demonstrated evidence of functional achievement of course learning outcomes.

Course grade description: Demonstrates adequate understanding and application of the fundamental concepts of the field of study; develops routine arguments or decisions and provides acceptable justification; communicates information and ideas adequately in terms of the conventions of the discipline: The student demonstrates an understanding of the theory of the topics listed in the course outline and demonstrates a knowledge of the techniques used to solve problems. To earn a final grade of 4, a student will have achieved a weighted average grade of at least 3.5, have met the hurdle requirements for the course, and not met the requirements for a higher grade.

5 (Credit)

Demonstrated evidence of proficient achievement of course learning outcomes.

Course grade description: Demonstrates substantial understanding of fundamental concepts of the field of study and ability to apply these concepts in a variety of contexts; develops or adapts convincing arguments and provides coherent justification; communicates information and ideas clearly and fluently in terms of the conventions of the discipline: The student demonstrates a good understanding of the theory of the topics listed in the course outline and can apply the techniques to solve problems. To earn a final grade of 5, a student will have achieved a weighted average grade of at least 4.5, have met the hurdle requirements for the course, and not met the requirements for a higher grade.

6 (Distinction)

Demonstrated evidence of advanced achievement of course learning outcomes.

Course grade description: As for 5, with frequent evidence of originality in defining and analysing issues or problems and in creating solutions; uses a level, style and means of communication appropriate to the discipline and the audience: The student demonstrates a comprehensive understanding of the theory of the topics listed in the course outline and is proficient in applying the techniques to solve both theoretical and practical problems. To earn a final grade of 6, a student will have achieved a weighted average grade of at least 5.3, have met the hurdle requirements for the course, and not met the requirements for a higher grade.

7 (High Distinction)

Demonstrated evidence of exceptional achievement of course learning outcomes.

Course grade description: As for 6, with consistent evidence of substantial originality and insight in identifying, generating and communicating competing arguments, perspectives or problem solving approaches; critically evaluates problems, their solutions and implications: The student demonstrates an excellent understanding of the theory of the topics listed in the course outline and is highly proficient in applying the techniques to solve both theoretical and practical problems. To earn a final grade of 7, a student will have achieved a weighted average grade of at least 6.2, and have met the hurdle requirements for the course.

Additional course grading information

For each category of assessment, a fractional grade will be calculated using grades from each assigned task. These fractional grades will be combined in a weighted average to determine your overall grade for the course, subject to the hurdle requirements below.ᅠ

Hurdle Requirements:

To obtain a grade of 4 or higher, students must meet ALL of the following requirements:

  • An average grade of 3.0 or higher in the End of Semester exam.
  • An average grade of 3.5 or higher in the practical worksheets and assessment.

Supplementary assessment

Supplementary assessment is not available for some items in this course.

Should you fail a course with a grade of 3 you may be eligible for supplementary assessment. Refer to my.UQ for information on supplementary assessment and how to apply. Supplementary assessment provides an additional opportunity to demonstrate you have achieved all the required learning outcomes for a course.

If you apply and are granted supplementary assessment, the type of supplementary assessment set will consider which learning outcome(s) have not been met.

Supplementary assessment in this course will be a 2-hour examination similar in style to the end- of-semester examination. To receive a passing grade of 3S4, you must obtain a mark of 3.5 or more on the supplementary assessment.

Supplementary assessment is not available if you do not meet the hurdle for the practical worksheets and assessment. The learning objects of the practical components are demonstrated throughout the semester and it is not possible to validly reassess these learning objectives in the supplementary assessment period.

Additional assessment information

Applications for Extensions to Assessment Due Dates

Extension requests are submitted online via my.UQ – applying for an extension. Extension requests received in any other way will not be approved. Additional details associated with extension requests, including acceptable and unacceptable reasons, may be found at my.UQ.

Please ensure you check the assessment description in your course profile for any limits on extensions and late submission before applying as each course may differ.

Please note:

  • Requests for an extension to an assessment due date must be submitted through your my.UQ portal and you must provide documentation of your circumstances, as soon as it becomes evident that an extension is needed. Your application must be submitted on or before the assessment item's due date and time.
  • Applications for extension can take time to be processed so you should continue to work on your assessment item while awaiting a decision. We recommend that you submit any completed work by the due date, and this will be marked if your application is not approved. Should your application be approved, then you will be able to resubmit by the agreed revised due date.
  • If an extension is approved, you will be notified via your my.UQ portal and the new date and time for submission provided. It is important that you check the revised date as it may differ from the date that you requested.
  • If the basis of the application is a medical condition, applications should be accompanied by a medical certificate dated prior to the assignment due date. If you are unable to provide documentation to support your application by the due date and time you must still submit your application on time and attach a written statement (Word document) outlining why you cannot provide the documentation. You must then upload the documentation to the portal within 24 hours.
  • If an extension is being sought on the basis of exceptional circumstances, it must be accompanied by supporting documentation (eg. Statutory declaration).
  • For extensions based on a SAP you may be granted a maximum of 7 days (if no earlier maximum timeframe applies). See the Extension or Deferral availability section of each assessment for details. Your SAP is all that is required as documentation to support your application. However, additional extension requests for the assessment item will require the submission of additional supporting documentation e.g., a medical certificate. All extension requests must be received by the assessment due date and time.
  • An extension for an assessment item due within the teaching period in which the course is offered, must not exceed four weeks in total. If you are incapacitated for a period exceeding four weeks of the teaching period, you are advised to apply for Removal of Course.
  • If you have been ill or unable to attend class for more than 14 days, you are advised to carefully consider whether you are capable of successfully completing your courses this semester. You might be eligible to withdraw without academic penalty - seek advice from the Faculty that administers your program.
  • Students may be asked to submit evidence of work completed to date. Lack of adequate progress on your assessment item may result in an extension being denied.

Applications to defer an exam

In certain circumstances you can apply to take a deferred examination for in-semester and end- of-semester exams. You'll need to demonstrate through supporting documentation how unavoidable circumstances prevented you from sitting your exam. If you can’t, you can apply for a one-off discretionary deferred exam.

Deferred Exam requests are submitted online via mySI-net. Requests received in any other way will not be approved. Additional details associated with deferred examinations, including acceptable and unacceptable reasons may be found at my.UQ

Please note:

  • Applications can be submitted no later than 5 calendar days after the date of the original exam.
  • There are no provisions to defer a deferred exam. You need to be available to sit your deferred examination.
  • Your deferred examination request(s) must have a status of "submitted" in mySI-net to be assessed.
  • All applications for deferred in-semester examinations are assessed by the relevant school. Applications for deferred end-of-semester examinations are assessed by the Academic Services Division.
  • You’ll receive an email to your student email account when the status of your application is updated.
  • If you have a medical condition, mental health condition or disability and require alternative arrangements for your deferred exam you’ll need to complete the online alternative exam arrangements through my.UQ This is in addition to your deferred examinations request. You need to submit this request on the same day as your request for a deferred exam or supplementary assessment. Contact Student Services if you need assistance completing your alternative exam arrangements request.

Learning resources

You'll need the following resources to successfully complete the course. We've indicated below if you need a personal copy of the reading materials or your own item.

Library resources

Find the required and recommended resources for this course on the UQ Library website.

Additional learning resources information

Pearson eText

Your Mastering Physics account comes with an e-copy of the 5th edition of your textbook.ᅠ You can access this e-text either online when you are logged on to the Mastering Physics platform, or offline if you download via the Pearson+ app on your mobile device. The 4th edition is very similar to the 5th edition, so you can buy a second hand 4th edition if you like (but some of the chapters are in a different order).ᅠ


Extra Help

The Physics Learning Centre (room 208 in the passageway between Parnell and the Physics Annexe) will be open 12:30 – 1:30pm Mon-Thurs, from Week 2 of semester onwards. You can drop into the P.L.C. any time during its opening hours to get assistance.


Other Useful Referencesᅠ

No textbook is perfect. If you have problems in understanding sections of Knight, or you want additional information, the books listed below are a good starting point. (Not in order of preference.)ᅠSome are in the library.

  • P. A. Tipler: Physics for Scientists and Engineers (this was used for this course until 2007).
  • R. T.ᅠ Weidner & R. L. Sells, Elementary Classical Physics.
  • R. A. Serway and others, Physics for Scientists and Engineers.
  • F. W. Sears, M. W. Zemansky & H. D. Young, University Physics.
  • H. C. Ohanian, Physics,.
  • D. Halliday, R. Resnick, and J. Walker, Fundamentals of Physics.
  • K. Cummings, P. W. Laws, E. F. Redish and P. J. Cooney Understanding Physics.
  • D. C. Giancoli, Physics for Scientists and Engineers.
  • M. Alonso and E. Finn, Physics.
  • R. P. Feynman, Feynman Lectures on Physics (relevant volume).

Good books for learning the mathematics involved are:

  • J Stewart, Calculus.
  • M.L. Boas, Mathematical methods in the physical sciences.


Learning activities

The learning activities for this course are outlined below. Learn more about the learning outcomes that apply to this course.

Filter activity type by

Please select
Clear filters
Learning period Activity type Topic
Multiple weeks

From O-week To Week 13

Not Timetabled

Textbook reading and workshop preparation

Engaging with the textbook is the foundation for all that follows in this course. Studies have shown that even the best content-focussed lectures are a poor substitute for simply reading the text. You will therefore be asked to read through relevant sections of the text before each class to make yourself familiar with the concepts that will be covered in the workshops.

Multiple weeks

From Week 1 To Week 13

Workshop

Workshops

Workshops will assume a basic familiarity with the content from assigned textbook readings. (Replicating what you could read for yourself in the text is a waste of valuable class time.) Instead in workshops we focus on the much more difficult task of processing the content: working through conceptual issues, exploring the implications of the theory, and developing strategies for solving problems. Workshops will be held on campus, and will make use of interactive features such as real-time polling and questionnaires.

Multiple weeks

From Week 2 To Week 13

Applied Class

Applied Classes and MasteringPhysics

To succeed in this course you will need to keep up regular practice on problem solving. Casual academics will provide guidance and feedback as you work through example problems. They can also provide assistance with MasteringPhysics exercises. Applied Classes will be conducted on campus. MasteringPhysics provides a platform to practice solving problems related directly to the textbook material. It provides hints and immediate feedback to support your learning.

Multiple weeks

From Week 3 To Week 12

Practical

Practical Laboratories

In practical classes you will design and perform experiments to deepen your understanding of relevant physics concepts and to develop your scientific thinking and communication skills.

Policies and procedures

University policies and procedures apply to all aspects of student life. As a UQ student, you must comply with University-wide and program-specific requirements, including the:

Learn more about UQ policies on my.UQ and the Policy and Procedure Library.

Use of AI in Teaching:

The University is exploring careful and responsible ways to use approved AI tools to support learning and teaching at UQ. The course Blackboard site will have further information about how AI tools might be used in this course. Please be aware that it is possible that student work may be used with approved AI tools.

If you have questions about this, please consult the AI Student Hub and your Blackboard site and contact your Course Coordinator if you have any further questions.

You'll also need to be aware of the following policies and procedures while completing this course: